Salt-laden air speeds up corrosion of unprotected metal gutters, brackets and screws, breaks down paint on cast iron and timber, and leaves a film on white uPVC and boards. Rinsing, repainting and replacing rusted fixings early is far cheaper than replacing a gutter run.
What salt does to a gutter
Sea air carries fine salt that settles on rooflines. Salt on bare or chipped metal speeds up rusting. Cast iron and steel gutters, galvanised brackets and ordinary screws are most at risk, and the damage shows first at joints and fixings.
Spotting early damage from the ground
Look for rust streaks running down brickwork below a bracket, flaking or blistering paint on cast iron, a gutter section that sits lower than its neighbours, and white uPVC that has gone chalky or green.
What helps
Keep paint on cast iron intact and repaint before bare metal shows. Replace rusted fixings with stainless or coated ones. Clear debris so water does not sit in the gutter holding salt against the metal. Plastic and powder-coated aluminium gutters are generally lower maintenance near the sea, although their joint seals and brackets still need checking.
Rinsing and cleaning
A regular clean gets rid of the gritty, salty sludge that collects in the run. It also lets you see the condition of the gutter underneath.